FERRYL Cleaning Fluid Oil and Grease Remover
- IMPA 450424
- Contact Us
FERRYL Cleaning Fluid Oil and Grease Remover
FERRYL油和油脂的去除剂
450424
CLEANING FLUID is 100% water-soluble and dissolves and removes oil, grease and dirt and emulsifies this into a solid emulsion. The FERRYL products rely on chemical properties for best possible results in rust prevention. The special FERRYL inhibitors contained in the FERRYL grease, oil or plastic compounds provide an excellent long lasting rust protection at a low cost. A few products will cover your entire need. All products are supplied ready to use.
Range of Applications Directions for Use
CLEANING FLUID is designed for cleaning of decks, ship sides,wings, engine parts, oil-preheaters, oilcoolers, cooling mantles, boiler suits, filters, overbunkering and waste oil, winches, painted surfaces, working clothes, hands, etc.
CLEANING FLUID should be sprayed or swabbed on actual surface, superstructures, floors, oil-, fresh-water tanks, and thereafter scrubbed with a stiff brush in order to mix into the oil or grease, etc. Allow it to soak into the dirt for 10-30 minutes and wash away with plenty of water (hot water for best result). The fluid washed away is a 100% emulsion. When cleaning surfaces with only light oil, grease, etc.,
CLEANING FLUID use a mixture of 10-25% CLEANING FLUID and water. For cleaning of cooling mantles, etc., you should allow undiluted
CLEANING FLUID is specially designed for the tough conditions on
board ships in world wide trade
CLEANING FLUID, or mixed with (preferably) hot water, to circulate in
the system for 8-10 hours. When the system has been
drained, rinse thoroughly with water.
CLEANING FLUID is delivered in 25L steel drums and 200L barrels.
Documentation and literature
MSDS