SODIUM HYPOCHLORITE POTABLE GRADE

Marine Chemical
SODIUM HYPOCHLORITE POTABLE GRADE
Product number:31001     25L
General description:
This is the specification for Potable Water Grade Sodium Hypochlorite that can be used to chlorinate and control bacterial growth in potable water, This product has passed the GB19106-2013A，the cabin and kitchen，swimming pools and spas, for grey and black water sterilisation.
Features

• Fast sterilization and disinfection
• Controls bacteria growth in drinking water, grey water, black water and pools and spas
• Reduces risk of illness and infections
Good for use in the following applications:
• drinking water disinfection
• Living area disinfection
• Cabin disinfection
• Kitchen sterilization
• Laundry bleaching
Direction for use
Sodium Hypochlorite solution typically contains 10 - 15% available chlorine.Sodium Hypochlorite may be applied directly to the water system at any point where there is sufficient time and turbulence to facilitate dissolution. The product should be applied and controlled to achieve the target free chlorine residual which is system dependent .Each system has a chlorine demand which has to be satisfied before free chlorine water cleanliness.
Dosage of Sodium Hypochlorite:
  . Potable water typically requires 15mls per /m3
  . Pools and Spas typically require 30 t0 50mls/m3
  . Grey water typically requires 40 to  100mls/ma
These are nominal dose rates and should be adjusted depending on measured free
chlorine results; Test kits can be selected from the Potable Water Test Kit range
Specification
General
CAS No. 7681-52-9
Physical properties
Appearance Green/yellow liquid
Available Chlorine 10 to 15%
Density [g/ml] 1.1
Freezing Point [°C] -15 to -18 C
Odour Chlorine

Attention:
if skin contact:Wash thoroughly with cold water and soap,contact physician plenty of cold water and seek medical advice.
if swallowed:induce vomiting.contact physician.