NALFLEET NALCOOL 2000
- IMPA 653 777710
- Time:2008-9-16
- Contact Us
NALFLEET NALCOOL 2000
冷却水腐蚀抑制剂
653 777710
General description
Nalfleet 2000 combines film forming corrosion inhibitors with a scale suppressant in liquid form for ease of application. Nalfleet 2000 is soluble in water in all proportions and does not contain chromates.
Features
Protects all common metals in cooling systems from corrosive attack
Protects against cavitation erosion
Compatible with anti-freeze solutions
Simple to control
Safe to apply and handle
Benefits
Minimises sludge and scale deposits
Approved by major diesel engine manufacturers
Test Kit for Nitrite, Chloride and P Alkalinity.
Product Number |
Product name |
777066 |
MOTOR SHIP TEST KIT MO |
Nalfleet 2000 has been designed for use in all common types of engine cooling water systems. Nalfleet 2000 will protect ferrous metals, copper and copper alloys and all other metals including aluminium components. Nalfleet 2000 will not affect rubber gaskets or other non-metallic components within the cooling system.
Sampling and Testing
The WSS Nitrite Test Kit (777067) provides the necessary equipment to carry out the control tests. Obtain a representative sample of the cooling water. Carry out the tests immediately after sampling (following the instructions given in the Test Kit) and log the results in Waterproof. The results should be sent to WSS as stated in the Waterproof instructions. It is important that testing is carried out at least once per week, to ensure levels of treatment are correct.
Dosing and Control
Engine cooling systems should be drained, flushed and if necessary, chemically cleaned, to remove old rust and scale deposits before treatment with Nalfleet 2000 can begin.
Nalfleet 2000 is easy to apply as received, and is fully compatible with water in ethylene glycol solutions. It contains an anti-scalant which helps to keep engine systems clean and free from corrosion and scale formation. Nalfleet 2000 maintains design heat transfer efficiencies and extends the life of the engine.
Cases of unusual coolant loss should be checked and remedial action taken. Nalfleet 2000 should be introduced during circulation of the cooling water. Nalfleet 2000 is best added by means of a feeder installed on a by-pass to the circulating system or in smaller systems, it can be added directly to the header tank. Initial treatment is at a rate of 32 liters of Nalfleet 2000 per
Nitrite ppm |
0 |
250 |
500 |
750 |
1000 |
Sodium Nitrite ppm |
0 |
375 |
750 |
1125 |
1500 |
Nalfleet 2000 ltr/m3 |
32 |
24 |
16 |
8 |
0 |
Further Technical Data
Form |
Liquid |
Colour |
Deep red |
Density |
1.095 - |
pH |
ca 11.0 |
Specific Heat |
3.9 J/g.K |
Thermal Conductivity |
79mS/cm |
Viscosity |
1.3 cST |
Freeze Thaw Recovery |
Complete |
Materials compatibility |
Stainless Steel, PVC, Polypropylene, Polyethylene, Natural Rubber, Synthetic Rubber, Viton |
SDS
· NALFLEET 2000 25 LTR