DEGREASER

DESCRIPTION

MAGNUS has specially formulated DEGREASER to provide a cleaning system for as many marine application as possible.

SAFE

DEGREASER is safe on all metals, will not harm paint and will not harm personnel. It has a high flash point and is non-toxic.

USES

DEGREASER is a blend of solvent cleaners and emulsifying agents that enable this product to be used in a number of applications. It can be used by applying with rag, mop, or spray. It can be used full strength or mixed with fresh or salt water.

DEGREASER can be applied and will rinsed well with water or it can be applied and allowed to dry without a rinse. In areas where the only preparation required for painting is removing oil films, DEGREASER  can be wiped on, wiped off and allowed to dry (usually 15 mins) and painted over.

DEGREASER can be used for removing lube oils, Bunker C, heavy gear grease, soils from bilge areas, deep tank cleaning, spotting out decks, tank tops and piers.

SPECIFICATION

Form:  A clear yellow liquid

Composition:  A blend of selected solvents and emulsifiers

Flash point:  75°C.  C.O.C

Stability:  Stable after repeated freeze-thaw cycles.

Weight:  Approximately 0.82 kg per ltr or 6.8 lbs per U.S.gallon.

PRECAUTION

Avoid prolonged contact with skin. Use in well ventilated area and keep away from open flame.

STORAGE

Store in a cool place in original container and protect from direct sunlight.

For more technical information, please contact Magnus Representative.

UNITED STATES COAST GUARD APPROVAL NO. 945

DIRECTION

METAL CLEANING - GENERAL

DEGREASER can be used straight or diluted with up to 5 parts of water according to the difficulty of the job.

DEGREASER  can be applied by brushing, wiping, dipping, or spraying at a close range. It can be flushed off with fresh or salt water.

METAL CLEANING - PRIOR TO PAINTING

DEGREASER  can be used as wipe-on cleaner prior to painting. It need not be rinsed. Wipe Dry.

MACHINERY AND EQUIPMENT

Use coarse spray or brush; wipe dry.