NALFLEET BWT LIQUID PLUS(B.W.T. LIQUID +)
- IMPA 777701
- Contact Us
BWT LIQUID PLUS(B.W.T. LIQUID +)
锅炉水综合处理剂
777701
General description
BWT Liquid Plus is a blend of phosphate, alkalinity and polymer dispersants designed for the control of scaling and corrosion in the boiler. BWT Liquid Plus can be used as a phosphate treatment for low hardness feed waters in boilers operating at pressures up to 40 bar.
Features
· Minimises scale formulation, corrosion and sludge accumulation
· Simple to Control
· Complies with FDA regulations where steam can contact food
· Effective iron dispersant
Ordering information
Product number Product name
777701 BWT LIQUID PLUS 25 LTR
Directions for use
Dosing Method
BWT Liquid Plus is best applied neat or diluted with condensate or evaporated water to any convenient strength and
applied on a continuous basis using a suitable chemical dosing pump.
Sampling and Testing
Control is by simple boiler water tests for alkalinity.
Dosing and Control
The dosage rate of BWT Liquid Plus sufficient to produce a P alkalinity in the boiler water of 100ppm is 0.4 liters/
1,000 liters of water. BWT Liquid Plus is strongly alkaline. Tanks and feeding equipment should be constructed of
suitably resistant material such as polypropylene, PVC, polyethylene, mild steel, cast iron or stainless steel. Avoid
the use of brass or light alloys.
Documentation
SDS
• BWT LIQUID PLUS 25 LTR
Further Technical Data
Form Liquid
Colour Pale Straw
Odour Ammoniacal
pH min 13
Density 1.46 -
Freezing Point <
Materials
Compatibility
Polypropylene, PVC, Polyethylene, Nylon, Stainless Steel, Viton, Buna –N, Neoprene, Butyl
Rubber, Nitrile Rubber, CAF, PTFE
Not Compatible Aluminium, Brass, Copper, Zinc, Light Alloys, Natural Rubber